IP
Cameras & CCTV
SSIS Hardware
Security & Surveillance Integrated System
SSIS is Axix Technologies' integrated hardware and controller platform for large facilities — combining CCTV/VMS, access control, ANPR, perimeter screening, PSIM data fusion, network and power monitoring, and dispatch workflows in a single command overview.
At a glance
Unified physical security command — CCTV, access, PSIM, and response in one integrated stack.
63
Access points
99.6%
Network uptime
90%
False alarm reduction
Command overview
Single window for your entire facility
Live KPIs, facility map with 185+ plotted devices, multi-layout video wall, and tiered alert feed in one operator console.
- IP cameras online at a glance
- Fusion rules and active alert counts
- Multi-layout video wall
Modules
Twelve integrated controller modules
CCTV/VMS, access control, ANPR, perimeter screening, PSIM fusion, dispatch, network monitoring, and more — plug-and-play architecture.
- Dynamic device registry
- Add hardware without core changes
- Per-module dedicated dashboards
Fusion
CAMNITIVE edge-first AI fusion
Correlate events across cameras, access readers, and sensors — reducing false alarms by up to 90% before they reach operators.
- Multi-source event correlation
- Configurable fusion rules
- Edge-first processing pipeline
Workflow
Detection through resolution lifecycle
From initial detection to physical patrol, drone dispatch, and resolution — every step logged with timestamps and evidence.
- Multi-channel dispatch options
- Drone fleet coordination
- Full incident audit trail
Comparison
SSIS vs standard control center
Traditional PSIM requires manual correlation across siloed systems. SSIS unifies CCTV, access, fusion, and dispatch in one stack.
- Unified alert feed vs siloed consoles
- Automated fusion vs manual review
- Single vendor integration path
Command console
Single window for your entire facility
Live KPIs, facility map with 185+ plotted devices, multi-layout video wall, and tiered alert feed — INFO, WARNING, CRITICAL. Browse all 12 dashboard modules below.
View complete workflow
Live facility state — all controllers in a single window with KPIs, facility map, and alert feed.
Modules
12 integrated controller modules
Plug in new hardware without core changes — dynamic device registry architecture.
Command Overview
Live facility state — all controllers in a single window with KPIs, facility map, and alert feed.
CCTV / VMS
IP camera lifecycle — Bullet, PTZ 42X/25X, ANPR, facial recognition, and thermal feeds.
Access Control
ANPR, facial recognition, PACS / VACS / BACS, and visitor management at every gate.
Alerts & Incident Management
Detection → verification → acknowledge → resolution with full audit trail.
Response & Dispatch
Immediate electronic response plus physical response intimation across channels.
PSIM / Data Fusion
CAMNITIVE edge-first AI fusion — proactive detection across all controller types.
Screening & Perimeter
Perimeter breach detection, screening checkpoints, and zone isolation controls.
Network & Power
Three-tier power monitoring (grid, generator, UPS) and switch health across the site.
Control Room
Operator console for multi-wall video, alert triage, and dispatch coordination.
Device Registry
Dynamic controller / adapter management — plug in new hardware without core changes.
PSIM / Data Fusion
CAMNITIVE edge-first AI fusion
Four-phase security lifecycle — from entry detection to advanced analytics.
Entry Detection
Facial recognition, vehicle ID, and ID-card scanning at every entry point with real-time monitoring dashboard.
Internal Tracking
Internal facial recognition, RFID tracking, 3D movement analysis, and zone management with interactive facility mapping.
Threat Intimation & Response
Fusion engine intimates threats to concerned quarters, blocks/jams entry points to isolate the threat, generates auto-alerts.
Advanced Analytics
AI-powered behavior analysis, crowd monitoring, threat detection, and a unified command center for full situational awareness.
Comparison
Why SSIS beats a standard control center
Standard Control Center
- Reactive, human-observed alarms
- Manual review of feeds & sensor data
- Disparate data, limited correlation
- Minimal automation
SSIS Automated Data Fusion
- Proactive AI fusion across all controllers
- Correlated events with 90% fewer false alarms
- Unified command overview — single window
- Automated response playbooks and dispatch
FAQ
SSIS questions
How is SSIS different from Axix Surveillance software?
Axix Surveillance is the AI software layer for IP camera analytics — deploy on your existing cameras. SSIS is the full integrated hardware and controller platform for large facilities that need CCTV/VMS, access control, PSIM fusion, and dispatch in one command system.
Can SSIS and Axix Surveillance work together?
Yes. SSIS provides the integrated hardware and controller layer; Axix Surveillance provides the AI analytics engine. They can be deployed together for facilities that need both integrated controllers and advanced AI video analytics.
How many cameras can it handle?
Minimum hardware (4-core, 16 GB): ~5 cameras at 15–20 FPS. Recommended hardware (8+ core, 32 GB): 10+ cameras at 25–30 FPS.
Ready for integrated facility security?
Talk to our team about SSIS deployment for your site — CCTV, access, fusion, and dispatch in one stack.